Want to play with a friend but don’t know how to connect a second controller to a PlayStation 4? Don’t worry; it’s as simple as that. Everyone can turn on the support of the second controller on the console – Sony has made the process convenient and easy-off. Our article is designed to help you figure out How to sync ps4 controller.
Wireless controllers are some of the best things about modern game consoles, but sometimes these controllers can cause pain – especially when they stop working for no apparent reason.
With DualShock 4 PlayStation 4 controllers, the Bluetooth connection between the console and the controller can sometimes be interrupted and cause some problems. Fortunately, the process of synchronizing any controller with your console is simple, and even if you have issues, resetting the controller so it can get a clear signal also doesn’t require too much work.
Here’s what you need to know to sync the PlayStation 4 Dualshock controller with the PS4 console and fix it if there’s a connection problem. And good news if you want to add dual-Shaq 4 rules to your PC. We have a guide for him too.
How to sync ps4 controller
In our guide book, we’ll tell you how to connect the DualShock 4 to your console step by step. Let’s see if there are two ways – wired and wireless, via Bluetooth.
Method No.1. How to connect the joystick to the PS4 via a USB cable
If you don’t have the original DualShock 4, follow the instructions of other manufacturers that connect only through wires:
- Click the power button on the PS4 console to turn on the device.
- The other end of the wire from the PS4 controller is the set-top box’s USB port.
- Click the CONTROLLER’s PS (or part of it) and hold it for three seconds;
- You need to connect the CABLE PS4 controller to the console now.
- If your regulator is wireless, here are some things you can do:
Turn on PS4
- Connect the usb wire to the PS4 controller. The micro USB port is behind the device;
- Connect the other end of your USB cable to the console.
- Press PS and press for 3 seconds;
- The wireless controller must now be registered in the set-top box. You can disable the USB cable and play without it.
- So, you can write the second, third, and fourth controllers on the console. Use the same USB cable, repeat these steps, and tie it to the new user’s control on the home screen.
Method No.2. How to connect a joystick to a PS4 without a wire
If you want to connect the second controller to the console, you can register the device if there is no USB cable. Follow these instructions:
- On the PS4 home screen, select Features> Devices> . . . Bluetooth devices (using another dual-shock four controller or remote control).
- In the controller, you want to connect, lock the SHARE and PS buttons and hold them for 10 seconds.
- Look at the screen. Control Bluetooth-enabled devices should appear in the list. Choose it.
- All – Your controller is now connected to the console. Enjoy the game!
Alternative Way How to sync ps4 controller
Contact station 4 Dualshock controller is simple, but it requires a piece of hardware. USB wire. There is no work to add controllers to Bluetooth, so you need a line to sync new PS4 controllers. Your dual-scoated four controllers comes with cables, but any USB 2.0 micro-B wire will work. Connect the USB cable to the controller, then to the USB port on PlayStation 4.
When you turn on PS4, your controller should automatically connect to a USB cable, thanks to the PlayStation. It would help if you pressed the PlayStation button in the controller’s center to turn on the control, and when you do this, PS4 will open your login screen to select a player account to use with that controller. You will say that the controller works because the LED panel at the top of the controller will turn blue (or any other color, unless it is the first connected controller – red for Player 2, Green and Pink for Player 3) Player 4). The cable also charges your controller with light-burning yellow while the controller is not turned on.
Make sure the controller is charged.
When you have a problem with a controller that does not work wirelessly with a control, the common problem with pairing is that the controller is undercharged. If it “disconnects and turns it on again” to fix the problem, it is
Make sure the regulator is charged when you plug it in – when it’s not in use, you’ll see that the light panel on top will turn yellow. If it doesn’t charge, you may have other problems or wrong cables.
Reset your controller by telling PS4 to “forget about it.”
If your pair-related problems are not electrical or wire, you need to reset the control and PlayStation 4 settings for reconnection. If you have a control that still works, you can do this on the PS4 Settings menu. It is on the main screen on the screen’s right and is represented by the suitcase icon.
Go to the Devices menu and then select Bluetooth. You’ll see all your controllers on the PlayStation as well as any Bluetooth device you’ll use. Choose which you are trying to reset (it can be hard to say, and if you have multiple, you need to turn on all your controllers), select it, and click X
Click “Options” in your regulator now to trigger the Context menu and select “Forget the device.” This can disconnect your controller from PlayStation 4.
You can connect the controller using a USB cable to reconnect the console as specified at this guide’s beginning.
Make a complete reset on your controller.
If the re-combination of the regulator sits, the problem may be the regulator itself, not PS4. In this case, you must restart the regulation. You may use it by pressing a hidden button on PS4 to reset it that you will need a deposit clip (or something as thin and durable).
Now turn off PS4 and unplug it and your Internet router or modem so that your controller does not receive any network signals when you restart. Flip the controller and get a small hole on the right. Stock the paperclip in the spot and press the inside button for three to five seconds. It’s good to keep it on ten scores to make sure it’s done.
When you do, reconnect your router and PS4. Turn on PS4, then attach the controller to the USB wire. This will reprogram the controller from scratch. If it doesn’t work, you may have a broken regulation.
Alternative: USB only
You can avoid Bluetooth wireless connections and play with Dualshock 4 controllers in a fully wired USB-enabled connection. This is not ideal if you play without possible wireless, but if connectivity and signal problems persist, it is an achievable task. You can set up PS4 controllers only with USB connected by changing the device menu settings like above. In the device section, go to the controllers and set up a controller to communicate only via USB after a connection is made. Therefore, if you have a wired connection, signal problems or Bluetooth problems will not affect the regulator.
How do I connect a Bluetooth headset to a PS4?
First, prepare the device you want to connect to. Then select Settings> “Devices” > “Bluetooth Devices” . It will automatically set up your console to search for additional pairs of devices. Show your devices, as well as an icon that indicates the type of device.
To add a new device, select it from the list of connected devices. A simple blue light will point to the left of the device name on the menu. If it’s turned on, you’ve already plugged this accessory into your console. Unless…
You must enter a password to add your device to some cases. Just enter the password.
And you did! Remember that the number of Bluetooth connections that PlayStation 4 can support is limited. The exact number depends on the console model, but you can rely on three or four links as a practical limitation.
PlayStation 4 is a versatile system that features a lot of unusual and hidden features. If you want to know more about your plans, if you have one of your new systems installed, check our PlayStation 4 Tips and Tricks as well as PlayStation 4 Pro check you can read our HDR setup instructions on your console and a list of all games to best use HDR Pro. Also, it would help if you prepared to enjoy your system and use all its clever tricks. Good game!
Which PS4 controller to choose?
This article will let you know what type of Dualshock 4 controller is available in PS4. First, it’s like highlighting the crossfire controller from studio gear.
The control is different from the primary control device with the papillae’s presence on the back of the body. The papillae are made of plastic abs and are attached to the body as a dare. Their initial function is copying the main front buttons (L2, 2, options, all but split, and PS). It fits perfectly in the hands of the height control and ergonomics.
The regulator’s advantages rarely get consideration in the network’s battles, along with the single project. So, in the snout, you can determine the functions of jumping or running from the buttons of the mouth. It significantly improves the game’s effectiveness in games like Dark Souls, Bloodborne, The snout and many more. Looking for the right button you don’t need to put your fingers on the regulator now – they are always on your arm.’
You may want to buy another coloured regulator. So, No one has a reason – the original DualShock 4 design is very impressive and the device immediately draws attention with grace and minimal beauty. Not all gamers like black.
How to sync ps4 controller
Dualshock 4 gamepad has a variety of colours. The Bloody Mary Controller, like the unique one from the Peterplay store, will separate you as a gamer when you play with friends. The controller case effectively justifies the name of the stylish light and bright red color. The controller has a soft touch coat and it is very nice to keep it while playing.
In this version, the face buttons of plastic controllers replace metal-style luezer bullets. Aluminium crust stooge is also longer than normal plastic. So, Bloody Mary loves accessories from all styles and standards for gamers. Now you know how to sync the PS4 controller.